The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.
Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´´ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port and front panel status LEDs. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.
Width | 94.5 mm |
Depth | 73.0 mm |
Height | 27.0 mm |
Standards and Protocols | IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
Ports | 1 100M SC port. 1 100M RJ45 port (Auto MDI/MDIX) |
Wave Length | 1310nm |
Network Media 10BASE-T | UTP category 3, 4, 5 cable (maximum 100m), EIA/TIA-568 100? STP (maximum 100m) |
Network Media 100BASE-T | UTP category 5, 5e cable (maximum 100m), EIA/TIA-568 100? STP (maximum 100m) |
Network Media 100BASE-FX | Single-mode Fiber |
LED Indicators | PWR, FDX/Col, Link/Act, SPD |
Half/Full-Duplex transfer mode for FX port | |
Full Duplex Flow Control (IEEE 802.3x) | |
Half Duplex Flow Control (Backpressure) | |
Extends fiber distance up to 2km | |
Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely |
3 Year Manufacturer Warranty |
Product will be delivered for all urban areas serviceable by major courier agencies. For remote/rural areas the product will be sent by local couriers / Indian Speed Post and may take little more time. | |
No Deliveries on Sunday and National Holidays. |